(5) If you choose concrete sleeve anchor, please follow the way below: Insert the sleeve anchor into the hole, tapping it in gently with a hammer until it is flush with the wall surface. (4) Clean the hole by using dry vacuum and the small wire brush to remove the debris from the hole. AlwaysÄrill 1/2" deeper than the anchor will penetrate. (3) Select a drill bit that matches the diameter of the anchor bolts and drill the locations you previously marked. If installing on a rock or stone wall, find the most level surface area to drill the holes.If your wall has mortar joints do not drill into the joints.(2) Mark the hole locations using a pencil or etching tool. (1) Once you've determined the best location, hold the mount against the wall and using the bubble level ensure the mount is level. Tighten each screw halfway and check that the wall plate remains level before fully tightening all of them. (4) Screw the bolts into the wall using a screwdriver or nut driver. Be sure the drill is entering the wood stud (~2") behind the surface by checking the material exiting the hole as you drill, wood fragments should be present. (3) Drill holes into the locations you previously marked. If you're not sure, you can always ask at your local hardware store. For metal studs, you need a standard carbide-tipped drill bit. For wood studs, you'll need a standard wood bit.(2) Mark the holes for drilling and select a drill bit that matches the bolts included with your mount. Line up with 2 of the Wall Plate holes to ensure the TV mount is securely mounted. Locate the stud locations that best match the mounting bracket's holes. (1) First, hold the TV Wall Plate against the stud locations you just marked and put the bubble level on the Wall Plate to ensure it is level.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |